Specs

DIMENSIONS
 

 
Cab height in (mm)
Wheelbase in (mm)
Ground clearance under shaft in (mm)
Ground clearance under axles in (mm)
Angle of departure in (mm)
Overall width without bucket in (mm)
Tread width in (mm)
Operating height – fully raised with spillguard in (mm)
Hinge pin height – fully raised in (mm)
Overall length – bucket level on ground in (mm)
Dump height – fully raised, 45° dump in (mm)
Bucket reach – fully raised, 45° dump in (mm)
Bucket reach – 7 ft 0 (2.13m), 45° dump in (mm)
Dig Depth in (mm)
Turning radius: outside in (mm)
Turning angle: From center degrees
Turning angle: Total angle degrees
Turning angle: Rear axle oscillation, total degrees
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
97” (2458) 97” (2458) 106” (2680)
82” (2075) 82” (2075) 88” (2225)
17” (444) 17” (444) 19” (493)
13” (321) 13” (321) 15” (370)
28° 28° 32°
69” (1740) 69” (1740) 73” (1860)
55” (1400) 55” (1400) 59” (1500)
154” (1400) 154” (1400) 169” (4322)
122” (3136) 121” (3113) 132” (3395)
206” (5283) 204” (5219) 222” (5684)
97” (2490) 93” (2396) 105” (2687)
30” (766) 26” (668) 33” (845)
43” (1102) 37” (948) 52” (1323)
3” (73) 5” (126) 3” (84)
146” (3721) 146” (3721) 157” (3987)
40 40 40
80 80 80
18 18 20
ELECTRICAL
 

 
Voltage volts
Alternator amps
Batteries
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
12 12 12
120 120 120
95 AHR, 900 CCA 95 AHR, 900 CCA 95 AHR, 900 CCA
HYDRAULICS
 

 
Pump (steering/implement)
Loader control valve
Loader auxiliary steering
Filtration
Flow at 2500 rpm gpm (lpm)
Main relief pressure psi (bar)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
Open-centered pressure/flow compensated. Fixed gear pump Open-centered pressure/flow compensated. Fixed gear pump Open-centered pressure/flow compensated. Fixed gear pump
Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller
Hydraulic orbital center-pivot articulating w/on-demand oil flow Hydraulic orbital center-pivot articulating w/on-demand oil flow Hydraulic orbital center-pivot articulating w/on-demand oil flow
15-micron, full flow replaceable cartridges on return line 15-micron, full flow replaceable cartridges on return line 15-micron, full flow replaceable cartridges on return line
18 (67) 18 (67) 22 (85)
3335 (230) 3335 (230) 3335 (230)
HIGH FLOW
 

 
Pump
Flow at 2500 rpm gpm (lpm)
Pressure psi (bar)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
Additional HF pump Additional HF pump Additional HF pump
NA NA 34 (130)
NA NA 2900 (200)
CYLINDERS
 

 
Lift cylinder(s)
Bore diameter in (mm)
Rod diameter in (mm)
Stroke in (mm)
Dump cylinder: Bore diameter in (mm)
Dump cylinder: Rod diameter in (mm)
Dump cylinder: Stroke in (mm)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
two one two
3 (70) 4 (102) 3 (84)
2 (51) 2 (51) 2 (51)
29 (728) 24 (600) 30 (751)
3 (83) 3 (83) 3 (89)
2 (44) 2 (51) 2 (57)
19 (492) 15 (391) 20 (507) COMPACT WHEEL LOADER SPECIFICATIONS 09 GHKLMNCBJDAFE
ENGINE
 

 
Model
Type
Cylinders
Fuel injection
Fuel
Fuel Filter
Air filter
Radiator Core type
Fan
Lubrication/cooling oil pump
Engine oil
Pump
Bore in. (mm)
Stroke in. (mm)
Displacement liters
Pump operating angles: Side-to-side degrees
Pump operating angles: Fore and aft degrees
Pump operating angles: Oil filtration
Engine speed: Rated speed, full load rpm
Engine speed: Low idle rpm
Engine speed: High idle, no load rpm
Horsepower @ 2500 rpm Gross hp (kW)
Horsepower @ 2500 rpm Net hp (kW)
Peak torque @ 1400 rpm Gross lb. ft. (N·m)
Peak torque @ 1400 rpm Net lb. ft. (N·m)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
F5HFL463B*F001 F5HFL463B*F001 F5HFL463A*F004
4-stroke 4-stroke 4-stroke
4 cylinders 4 cylinders 4 cylinders
High pressure common rail injection High pressure common rail injection High pressure common rail injection
Diesel Diesel Diesel
Replaceable, full flow Replaceable, full flow Replaceable, full flow
Dry type element w/ warning restriction indicator Dry type element w/ warning restriction indicator Dry type element w/ warning restriction indicator
Staggered Staggered Staggered
Direct drive Direct drive Direct drive
Integral Integral Integral
SAE 10W40 CJ-4 Diesel SAE 0W40 CJ-4 Diesel SAE 10W40 CJ-4 Diesel SAE 0W40 CJ-4 Diesel SAE 10W40 CJ-4 Diesel SAE 0W40 CJ-4 Diesel
Deep sump plate cooler with pressurized under-piston nozzles Deep sump plate cooler with pressurized under-piston nozzles Deep sump plate cooler with pressurized under-piston nozzles
3.898 (99) 3.898 (99) 3.898 (99)
4.33 (110) 4.33 (110) 4.33 (110)
3.4 3.4 3.4
Rated 35 Rated 35 Rated 35
Rated 35 Rated 35 Rated 35
Replaceable, full flow Replaceable, full flow Replaceable, full flow
2500 2500 2500
950 950 950
2500 2500 2500
58 (43) 58 (43) 74 (55)
55 (41) 55 (41) 70 (52)
181 (245) 181 (245) 233 (316)
185 (251) 185 (251) 227 (308)
DRIVETRAIN
 

 
Transmission
Planetaries
Pump relief psi (kPa)
Pump flow @ 2500 rpm gpm (L/min)
Differential
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
Hydrostatic transmission Hydrostatic transmission Hydrostatic transmission
Outboard Outboard Outboard
6 (42) 6 (42) 6 (42)
26 (100) 26 (100) 37 (140)
Open or LSD Open or LSD Open Diff or LSD or 100% Diff Lock
FRONT AXLE
 

 
Differential ratio
Planetary ratio
Final axle ratio
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
3.67 3.67 3.67
6 6 6
22 22 22
GEAR BOX
 

 
1st ratio
2nd ratio
Service brakes
Parking brake
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
1.85 1.85 2.75
NA NA 1.163
Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle
Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment
TRAVEL SPEEDS
 

 
Turtle – Forward mph (km/h)
Turtle – Reverse mph (km/h)
Rabbit – Forward mph (km/h)
Rabbit – Reverse mph (km/h)
High speed – Turtle – Forward mph (km/h)
High speed – Turtle – Reverse mph (km/h)
High speed – Rabbit – Forward mph (km/h)
High speed – Rabbit – Reverse mph (km/h)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
3 (5) 3 (5) 3 (5)
3 (5) 3 (5) 3 (5)
12 (20) 12 (20) 9 (14)
12 (20) 12 (20) 9 (14)
NA NA 3 (5)
NA NA 3 (5)
NA NA 21 (33)
NA NA 21 (33)
SERVICE CAPACITIES
 

 
Fuel tank gal. (l)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
23 (87) 23 (87) 23 (87)
HYDRAULIC SYSTEM
 

 
Total gal. (l)
Reservoir gal. (l)
Front Axle gal. (l)
Rear Axle gal. (l)
Engine oil w/ filter gal. (l)
Cooling gal. (l)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
15 (57) 15 (57) 15 (57)
11 (40) 11 (40) 11 (40)
2 (9) 2 (9) 2 (9)
3 (12) 3 (12) 3 (12)
2 (7) 2 (7) 2 (7)
3 (13) 3 (13) 3 (13)
OPERATING WEIGHTS
 

 
Reference configuration
Reference tires
Reference bucket
Operating weights lb. (kg)
With optional counterweight lb. (kg)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator
12.5-18 PRMPT Dunlop Tires 12.5-18 PRMPT Dunlop Tires 12.5-18 PRMPT Dunlop Tires 365/80 R20 Dunlop Tires
0.9 yd³ (0.7 m³) general purpose bucket w/ Bolt-on-Edge 0.9 yd³ (0.7 m³) general purpose bucket w/ Bolt-on-Edge 1.4 yd³ (1.0 m³) general purpose bucket w/ Bolt-on-Edge
11,111 (5040) 10,913 (4950) 13,184 (5980)
NA NA 13,514 (6130)
FORKS
 

 
Fork weight with V type Coupler lb. (kg)
Forks length in. (mm)
Fork load center in. (mm)
Max height below forks in. (mm)
Ground-Fork Clearance @ max Reach in. (mm)
Payload (80% of FTTL – EN 474-3) lb. (kg)
Tipping load – straight lb. (kg)
Tipping load – 40° turn lb. (kg)
Payload (80% of FTTL – EN 474-3) w/ add cwt lb. (kg)
Tipping load with add cwt- straight lb. (kg)
Tipping load with add cwt – 40° turn lb. (kg)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
772 (350) 745 (338) 761 (345)
47 (1200) 47 (1200) 47 (1200)
20 (500) 20 (500) 20 (500)
114 (2903) 116 (2959) 128 (3239)
50 (1266) 53 (1344) 55 (1398)
4004 (1816) 4524 (2052) 5011 (2273)
6019 (2730) 6539 (2966) 7372 (3344)
5004 (2270) 5655 (2565) 6266 (2842)
NA NA 5344 (2424)
NA NA 7950 (3606)
NA NA 6680 (3030)
STD BUCKET
 

 
Dump angle – fully raised degrees
Max. rollback: Ground degrees
Max. rollback: Carry Position degrees
Max. rollback: @ Maximum reach degrees
Max. rollback: @ Full height degrees
Maximum back dragging angle degrees
ISO bucket capacity – Struck yd3 (m3)
Heaped yd3 (m3)
Bucket width – outside in. (mm)
Bucket weight (incl. Coupler and components) lb. (kg)
Operating load – ISO lb. (kg)
Maximum material density – ISO lb/yd³ (kg/m3)
Tipping load – ISO: Straight lb. (kg)
Tipping load – ISO: 40° turn lb. (kg)
Tipping load – ISO: Straight with add cwt
Tipping load – ISO: 40° turn with add cwt
Operating load with add cwt – ISO
Maximum material density with add cwt – ISO
Lift Capacity: Full height lb. (kg)
Lift Capacity: Maximum reach lb. (kg)
Lift Capacity: Ground lb. (kg)
Breakout force with tilt cylinder lbf. (kgF)
Loader clearance circle in. (mm)
W50C ZB

W50C ZB
W50C TC

W50C TC
W80C HS

W80C HS
45 45 45
39 37 40
47 44 45
69 53 55
73 55 55
42 72 61
0.7 (0.5) 0.7 (0.5) 1.2 (0.8)
1.0 (0.7) 1.0 (0.7) 1.4 (1.0)
74 (1900) 74 (1900) 82 (2100)
805 (365) 844 (383) 926 (420)
3538 (1605) 3598 (1632) 3962 (1797)
3865 (2293) 3930 (2331) 3029 (1797)
8534 (3871) 8322 (3775) 9517 (4317)
7077 (3210) 7194 (3263) 7921 (3593)
NA NA 10,031 (4550)
NA NA 8510 (3860)
NA NA 4006 (1817)
NA NA 3147 (1867)
7227 (3278) 5542 (2514) 8424 (3821)
9200 (4173) 6140 (2785) 10,644 (4828)
11,669 (5293) 6614 (3000) 13,746 (6235)
13,356 (6058) 9048 (4104) 13,927 (6317)
335 (8596) 331 (8498) 362 (9294)