Specs

New Holland-Disc Cutterbar
 

 
Type
Width of Cut, ft. in. (m)
Number of discs
Number of knives
Disc Speed, rpm
Cutting angle
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm)
Fixed Raised, high-stubble skid shoe
Adjustable Raised, high-stubble skid shoe
BioMass skid shoe
Ground clearance with header fully raised, in. (mm)
Cutterbar Flotation
QuickMax™ Knife Change System
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
MowMax™ II True Modular Disc Cutterbar MowMax™ II True Modular Disc Cutterbar MowMax™ II True Modular Disc Cutterbar MowMax™ II True Modular Disc Cutterbar
13′ 0″ (4) 13′ 0″ (4) 16′ 3” (4.95) 16′ 3” (4.95)
8 8 10 10
16 (2 per disc) 16 (2 per disc) 20 (2 per disc) 20 (2 per disc)
2,250 2,250 2,250 2,250
2 to 10 degrees 2 to 10 degrees 2 to 10 degrees 2 to 10 degrees
0.79-2.07 (20-69) 0.79-2.07 (20-69) 0.79-2.07 (20-69) 0.79-2.07 (20-69)
.79-5.75 (20- 146) .79-5.75 (20- 146) .79-5.75 (20- 146) .79-5.75 (20- 146)
3-5.5 (76 – 140) 3-5.5 (76 – 140) 3-5.5 (76 – 140) 3-5.5 (76 – 140)
5-7.75 (127- 197) 5-7.75 (127- 197) 5-7.75 (127- 197) 5-7.75 (127- 197)
16.2″ (411) 16.2″ (411) 16.2″ (411) 16.2″ (411)
Vertical and lateral, adjustable springs Vertical and lateral, adjustable springs Vertical and lateral, adjustable springs Vertical and lateral, adjustable springs
Chevron-Design Roll Conditioner
 

 
Chevron-Design Roll Conditioner
Type
Roll Length, in. (mm)
Roll Diameter, in. (mm)
Roll Drive
Roll Speed, rpm
Roll Pressure System
Conditioner Intensity Adjustment
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
Choice of molded rubber or steel rolls Choice of molded rubber or steel rolls Choice of molded rubber or steel rolls Choice of molded rubber or steel rolls
125 (3175) 125 (3175) 125 (3175) 125 (3175)
10.4 (264) 10.4 (264) 10.4 (264) 10.4 (264)
4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears
Two-Speed: 750 or 640 Two-Speed: 750 or 640 Two-Speed: 750 or 640 Two-Speed: 750 or 640
Torsion Bar Torsion Bar Torsion Bar Torsion Bar
Single crank adjustable roll pressure and two stop bolts to adjust roll gap Single crank adjustable roll pressure and two stop bolts to adjust roll gap Single crank adjustable roll pressure and two stop bolts to adjust roll gap Single crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
 

 
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)
Standard Speed, rpm
Optional Slow Speed, rpm
Drive
Conditioner Intensity Adjustment
Optional Textured Hood Liner Kit
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
120 120 120 120
22 (560) 22 (560) 22 (560) 22 (560)
1042 1042 1042 1042
752 752 752 752
4 HB V-belt 4 HB V-belt 4 HB V-belt 4 HB V-belt
Single crank adjustable rotor hood Single crank adjustable rotor hood Single crank adjustable rotor hood Single crank adjustable rotor hood
Attachment
 

 
Standard Drawbar
Drawbar Swivel Hitch
2-pt Swivel Hitch
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
Dimensions
 

 
Height, Transport, ft. in. (m)
Height, Operating, ft. in. (m)
Width, Transport, ft. in. (m)
Width, Operating, Std. Drawbar Hitch, ft. in. (m)
Width, Operating 2-pt Swivel Hitch, ft. in. (m)
Width, Operating Drawbar Swivel Hitch, ft. in. (m)
Length, Transport, Standard Drawbar Hitch, ft. in. (m)
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)
Weight, Operating lbs. (kg)
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
7′ 5″ (2.26) 7′ 5″ (2.26) 7′ 5″ (2.26) 7′ 5″ (2.26)
6′ 7″ (2.01) 6′ 7″ (2.01) 6′ 7″ (2.01) 6′ 7″ (2.01)
13′ 4″ (4.04) 13′ 4″ (4.04) 16′ 7″ (5.05) 16′ 7″ (5.05)
21′ 3″ (6.5) 21′ 3″ (6.5) 25′ 7″ (7.8) 25′ 7″ (7.8)
19′ 7” (6.0) 19′ 7” (6.0) 19′ 7” (6.0) 19′ 7” (6.0)
27′ 5” (8.4) 27′ 5” (8.4) 32′ 0” (9.7) 32′ 0” (9.7)
26′ 5″ (8.1) 26′ 5″ (8.1) 31′ 0” (9.4) 31′ 0” (9.4)
23′ 0” (7.0) 23′ 0” (7.0) 26′ 7” (8.1) 26′ 7” (8.1)
22′ 0” (6.7) 22′ 0” (6.7) 25′ 7” (7.8) 25′ 7” (7.8)
6,275 (2846) 6,275 (2846) 6,700 (3039) 6,700 (3039)
Drive
 

 
Drive
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
1000 rpm PTO, enclosed gears and four HB belt 1000 rpm PTO, enclosed gears and four HB belt 1000 rpm PTO, enclosed gears and four HB belt 1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
 

 
Drive Protection
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
Slip clutch and over-running clutch Slip clutch and over-running clutch Slip clutch and over-running clutch Slip clutch and over-running clutch
Hydraulics
 

 
Hydraulic swing
Operating Position
Hydraulic lift
Hydraulic tilt
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
Standard (double-acting cylinder) Standard (double-acting cylinder) Standard (double-acting cylinder) Standard (double-acting cylinder)
Center-Pivot, Right or Left Side Center-Pivot, Right or Left Side Center-Pivot, Right or Left Side Center-Pivot, Right or Left Side
Standard (operated by two single-acting cylinders; master/slave) Standard (operated by two single-acting cylinders; master/slave) Standard (operated by two single-acting cylinders; master/slave) Standard (operated by two single-acting cylinders; master/slave)
Standard (operated by single-acting cylinder and incorporated into the lift system) Standard (operated by single-acting cylinder and incorporated into the lift system) Standard (operated by single-acting cylinder and incorporated into the lift system) Standard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
 

 
Swath, ft. (mm)
Windrow, ft. (mm)
Wide Thin Fin Kit (100 % Coverage)
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
10 (3000) 10 (3000) 10 (3000) 10 (3000)
Adjustable from 3 to 8 (914 to 2400) Adjustable from 3 to 8 (914 to 2400) Adjustable from 3 to 8 (914 to 2400) Adjustable from 3 to 8 (914 to 2400)
Speeds
 

 
Operating, mph (kph)
Transport, mph (kph)
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
0 to 9 (0 to 14.5) 0 to 9 (0 to 14.5) 0 to 9 (0 to 14.5) 0 to 9 (0 to 14.5)
20 (32) 20 (32) 20 (32) 20 (32)
Tractor Requirement
 

 
Tractor Requirement
Hydraulic valves
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
90 PTO hp (67 kW) or greater with standard ASAE Category II or III drawbar. 90 PTO hp (67 kW) or greater with standard ASAE Category II or III drawbar. 100 PTO hp (75 kW) or greater with standard ASAE Category III drawbar. 100 PTO hp (75 kW) or greater with standard ASAE Category III drawbar.
All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
 

 
Size
Discbine® 313 (flail)

Discbine® 313 (flail)
Discbine® 313 (roll)

Discbine® 313 (roll)
Discbine® 316 (flail)

Discbine® 316 (flail)
Discbine® 316 (roll)

Discbine® 316 (roll)
12.5L x 15 8PR 12.5L x 15 8PR 12.5L x 15 8PR 12.5L x 15 8PR