Specs
| Model | Description | MSRP |
|---|---|---|
| SCZII-61RD-31FX | 61″ Velocity Plus™ Rear Discharge Cutter Deck, 31 HP Kawasaki® FX Series | $12,499 |
| SCZII-61V-31FX | 61″ Velocity Plus™ Cutter Deck, 31 HP Kawasaki® FX Series | $15,665 |
| SCZII-61V-37BV-EFI | 61″ Velocity Plus™ Cutter Deck, 37 HP Briggs Vanguard™ BIG BLOCK™ EFI – electronic fuel injection | $15,749 |
| SCZII-61V-38CV-EFI | 61″ Velocity Plus™ Cutter Deck, 38 HP Kohler® Command PRO® EFI – electronic fuel injection | $15,749 |
| SCZII-61V-38FX-EFI | 61″ Velocity Plus™ Cutter Deck, 38 HP Kawasaki® FX Series EFI – electronic fuel injection | $15,949 |
| SCZII-61RD-38FX-EFI | 61″ Velocity Plus™ Rear Discharge Cutter Deck, 38.5 HP Kawasaki® FX Series EFI – electronic fuel injection | $16,099 |
| SCZII-72V-37BV-EFI | 72″ Velocity Plus™ Cutter Deck, 37 HP Briggs Vanguard™ BIG BLOCK™ EFI – electronic fuel injection | $16,549 |
| SCZII-72V-38CV-EFI | 72″ Velocity Plus™ Cutter Deck, 38 HP Kohler® Command PRO® EFI – electronic fuel injection | $16,549 |
| SCZII-72V-38FX-EFI | 72″ Velocity Plus™ Cutter Deck, 38 HP Kawasaki® FX Series EFI – electronic fuel injection | $16,749 |
| * Limited availability. Contact your local Scag dealer for specific availability information. |
| Specification | Cheetah | |
|---|---|---|
| General | Total Fuel Capacity | 13 gallons |
| Drive Tires | 24″ x 12″-12″ | |
| Caster Tires | 13″ x 6.5″-6″ | |
| Seat | 4-point iso-mounted mid-back mounted on operator-suspension platform | |
| Drive System | Drive System Type | Hydro-Gear ZT5400 Transaxle. Two-Speed |
| Pumps | Internal Pump: 16 cc | |
| Motors | Internal Motor: 21 cc | |
| Forward Ground Speed | 16 mph (high-speed)
12 mph (low-speed) |
|
| Reverse Ground Speed | 8 mph (high-speed)
5 mph (low-speed) |
|
| Parking Brake | Foot-operated pedal | |
| Deck | Cutting Widths | 61″ and 72″ |
| Type | Velocity Plus™ | |
| Cutting Height | 1.25″ to 5″ in .25″ increments | |
| Deck Lift | Adjustable foot-operated pedal | |
| Construction | Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles. | |
| Spindles | Cast-iron housing with tapered roller bearings. | |
| Blade Engagement | Ogura GT5 (350 ft lb)
Adjustable air-gap for extended life. |
